Pro Audio Config

Pro Audio Cases -> Subcategories

Rack Cases -> Subcategories

Soft Racks

Roto Racks

Fly Racks

Shock Racks

MIL-STD Shock Racks

Specialty Racks

Accessories (for Rack Cases)

Available in 4U, 6U, and 8U sizes, SKB Shallow Rolling Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability. These racks incorporate our one-touch pull handle and side mounted wheels to improve ease of transport and help eliminate heavy lifting and carrying.

The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Shallow Racks, Standard Roto Racks, and Standard Roto Rolling Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other standard features include front and rear steel threaded rails and rack screws (10-32 thread), recessed steel Mil-Spec twist latches, flush carry handles, and non-slip rubber feet. All Shallow Roto Rolling Racks are 11.75" deep from front rail to rear rail.

Roto molded of Linear Low Density Polyethylene (LLDPE) for maximum strength & impact resistance

Side mounted wheels and one-touch telescoping pull handle

Gasket-sealed waterproof front & rear lids

Our all-new 1SKB-R106W Rolling Compact Rig features a standard 10U top and 6U front and rear rack rails. 

It also includes a new one-touch pull handle and back lid mounted wheels for easy transport, as well as a redesigned exterior that allows this new Rig to easily stack with existing standard Roto-Racks and the recently updated Roto Rolling Racks. Featuring an injection-molded top, the new Rolling Compact Rig also comes standard with TSA-accessible locking latches that secure the lid to the top of the rig.

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit 

Fits the Allen & Heath SQ5 only with the 1SKB-RE-SQ5 rack ears.

Rotationally molded of Linear Medium Density Polyethylene (LMDPE) for maximum impact resistance

10U, 7-degree angled top threaded steel rails for secure mounting of popular mixers/DJ controllers

6U threaded vertical steel rails on front

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.

Our all-new 1SKB-R104W Rolling Compact Rig features a standard 10U top and 4U front and rear rack rails. 

4U threaded vertical steel rails on front

Our all-new 1SKB-R102W Rolling Compact Rig features a standard 10U top and 2U front and rear rack rails. 

2U threaded vertical steel rails on front

Available in 4U, 6U, and 8U sizes, SKB Roto Rolling Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability. 

These racks incorporate our one-touch pull handle and back lid mounted wheels to improve ease of transport and help eliminate heavy lifting and carrying. The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Shallow Racks and Standard Roto Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other standard features include front and rear steel threaded rails and rack screws (10-32 thread), recessed steel Mil-Spec twist latches, flush carry handles, and non-slip rubber feet. All Roto Rolling Racks are 17.6" deep from front rail to rear rail.

Downloads

One-touch pull handle & integrated back lid wheels

Optional Roto Caster Board available (1SKB-RCB)

Available in 4U, 6U, and 8U sizes, SKB Roto Rolling Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability. These racks incorporate our one-touch pull handle and back lid mounted wheels to improve ease of transport and help eliminate heavy lifting and carrying. 

The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Shallow Racks and Standard Roto Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other standard features include front and rear steel threaded rails and rack screws (10-32 thread), recessed steel Mil-Spec twist latches, flush carry handles, and non-slip rubber feet. All Roto Rolling Racks are 17.6" deep from front rail to rear rail.

The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Shallow Racks and Standard Roto Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other standard features include front and rear steel threaded rails and rack screws (10-32 thread), recessed steel Mil-Spec twist latches, flush carry handles, and non-slip rubber feet. All Roto Rolling Racks are 17.6" deep from front rail to rear rail.&nbsp;

Available in 2U, 3U, 4U, 6U, 8U, 10U, and 12U sizes, SKB Standard Roto Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability. 

The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Shallow Racks and Roto Rolling Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other standard features include front and rear steel threaded rails and rack screws (10-32 thread), recessed steel Mil-Spec twist latches, flush carry handles, and non-slip rubber feet. All Standard Roto Racks are 17.6" deep from front rail to rear rail.

Available in 2U, 3U, 4U, 6U, 8U, 10U, and 12U sizes

The 1SKB-R100 is a 10U slanted top rack mixer case that features steel threaded rails, a hard lid and a removable rear door for maximum access to the rack gear, side access ports (for cable routing) on each side with a comfortable rubber over-molded handle on each side for easy carrying. 

The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard cover and rear door are Injection molded of Rubber Modified Styrene (RMS). Two TSA locking SKB patented Trigger Latch® System secure the lid while the flat hard top allows for stacking with the revised roto racks to create a modular solution for easy set-up.

The height at the front of the rack is 5.25".  The height in the rear of the rack is 7.75".  Fits the Allen & Heath SQ5 only with the 1SKB-RE-SQ5 rack ears.

Roto-molded of LMDP Linear Medium Density Polyethylene

The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Shallow Racks and Roto Rolling Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other standard features include front and rear steel threaded rails and rack screws (10-32 thread), recessed steel Mil-Spec twist latches, flush carry handles, and non-slip rubber feet. All Standard Roto Racks are 17.6" deep from front rail to rear rail.&nbsp;&nbsp;&nbsp;

Available in 2U, 3U, 4U, and 6U sizes, SKB Shallow Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability. 

The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Standard Roto Racks and Roto Rolling Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other standard features include front and rear steel threaded rails and rack screws (10-32 thread), recessed steel Mil-Spec twist latches, flush carry handles, and non-slip rubber feet. All Shallow Racks are 10.7" deep from front rail to rear rail.&nbsp;&nbsp;&nbsp;

Roto-molded of Linear Low Density Polyethylene (LLDPE) for maximum strength & impact resistance

The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Standard Roto Racks and Roto Rolling Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other standard features include front and rear steel threaded rails and rack screws (10-32 thread), recessed steel Mil-Spec twist latches, flush carry handles, and non-slip rubber feet. All Shallow Racks are 10.7" deep from front rail to rear rail.

The 1SKB-R102 is a 10U slanted top and 2U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! 

The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented Trigger Latch® System secure the lid while the flat hard top allows for stacking in transport and storage.

Note: Item may be pictured with the 1SKB-AV8 Retractable Shelf but is not included with this item.

The top rack has 17.5" rackable depth plus 2.25" in back for cables for a total of 19.75" on the top.

The lower 2U Rack is 3.5" high in front and 5.75" high in the rear with a 19.5" of useable depth.

Injection molded front and rear doors and lid

The 1SKB-R1906 was designed to add expandability to the 1SKB-R102, 1SKB-R104, and 1SKB-R106 The 1SKB-R1906 can even stack on itself (remove the casters from the top one before stacking).

There is a 1" border around the top of the case (to help hold whatever is on top, in place). So the actual depth (height) is 16" and if you include the wheels, it's 21" (20" from the bottom of the wheels to the top mounting surface)

Durable 5 inch wheels with dual locking feature

The 1SKB-R106 is a 10U slanted top and 6U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! 

The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented Trigger Latch® System secure the lid while the flat hard top allows for stacking in transport and storage.

Note: Item is pictured with the 1SKB-AV8 Retractable Shelf and the 1SKB-DRW4 4 space drawer which are not included with this item.

At the bottom of the top slanted rail, the depth is 3.75". If nothing is mounted in the 4 spaces on the front, then the actual depth at top of the slant rail would actually be 17.125". After the first 3" from the bottom of the slant rail (and with nothing mounted in the 4 spaces on the front), the depth is 15.375". Product weight is without the optional 1SKB-AV8. 

Pictured retractable shelf is NOT included

The 1SKB-R104 is a 10U slanted top and 4U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed. 

At the bottom of the top slanted rail, the depth is 3.75". If nothing is mounted in the 4 spaces on the front, then the actual depth at top of the slant rail would actually be 13.5". After the first 3" from the bottom of the slant rail (and with nothing mounted in the 4 spaces on the front), the depth is 11.75". Space between the top of the slant rails and the cover is ~3.5" (to allow XLR/cable connections on mixer with top mounted mic pres). Product weight is without the optional 1SKB-AV8. 