Musical Instruments Config

Guitar Cases -> Subcategories

Keyboard Cases -> Subcategories

Percussion Cases -> Subcategories

B and O Cases -> Subcategories

The 1SKB-1712TPB includes a 1SKB-PB1712 Injection Molded Non-powered Pedalboard bundled with a Think Tank-designed soft bag. The pedalboard measures 17.67" x 12.37" and features a unique under-mounting surface that allows for convenient storage and transport of a variety of power supplies. 

Others standard features include molded-in hand grips for easy lifting, six zip ties for cable management, and 96" of 3M brand low profile Dual-Lock for secure positioning of pedals. The soft bag features a padded carry handle, rigid exterior, YKK zippers, and a thick, padded shoulder strap. It also has a large front pocket that's perfect for cables, sheet music, guitar strings, and other accessories.

Think Tank soft bag and 1SKB-PB1712 pedalboard bundle

Under-mounted tray accommodates a variety of power supplies

Includes 96" of 3M brand low profile Dual-Lock

The 1SKB-PB1712 Injection Molded Pedalboard is constructed of lightweight, heavy-duty ABS and accommodates up to eight pedals. The frame size is 17.67" x 12.37". It also features a unique under-mounting surface that allows for convenient storage and transport of a variety of power supplies. Other standard features include molded-in hand grips for easy lifting, six zip ties for cable management, and 96" of 3M brand low profile Dual-Lock for secure positioning of pedals.

Made In USA

The 3i-2015-7-PB includes a 1SKB-PB1712 Injection Molded Non-Powered Pedalboard in an iSeries 2015-7 case. The Pedalboard size is 17.67" x 12.37". It also features a unique under-mounting surface that allows for convenient storage and transport of a variety of power supplies. Other standard features include molded-in hand grips for easy lifting, six zip ties for cable management, and 96" of 3M brand low profile Dual-Lock for secure positioning of pedals.

The iSeries case features a virtually indestructible exterior and a custom foam interior that provides a perfect fit for a 1SKB-PB1712 pedalboard.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).

Includes iSeries 2015-7 case and 1SKB-PB1712 pedalboard

Includes 96" of 3M brand Dual-Lock for secure positioning of pedals

Featuring high quality form-cut PE foam designed specifically to house the Kemper Profiler Stage, the 3i-2015-7KPS case interior also includes a 16.5" x 3.25" x 5" pocket for an expression pedal, power cables and other accessories. There is additional storage under the pedalboard which measures 14" x 8" x 2".

Custom cut interior for Kemper Profiler Stage

Ultra high-strength polypropylene copolymer resin

UV, solvent, corrosion and fungus resistant (MIL-STD 810H)

Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H)

Automatic ambient pressure equalization value (MIL-STD 810H)

Featuring high quality form-cut PE foam designed specifically to house the Line 6 Helix LT or Line 6 Helix, the 3i-2421-7LH iSeries Line 6 Pedalboard Case interior also includes two large pockets for cables, additional pedals, or other accessories. 

The case comes standard to fit the Line 6 Helix LT pedalboard, with pull-out sections of foam that can be removed on each side to fit the larger Line 6 Helix. An oversized carry handle, user-friendly one-finger push button release tow handle, and convenient in-line wheels all help to ensure that transporting your gear is as easy and secure as possible.

Each accessory pocket is 19.625" x 3" x 5" deep.

Custom cut Foam interior for Line 6 Helix or Line 6 Helix LT

Pull-out foam sections allow for Line 6 Helix to fit into the case

Two large compartments for cables and accessories

Ultra high-strength polypropylene copolymer resin shell

Convenient in-line skate style wheels with pull handle

The 1SKB-PS-8PRO Powered Pedalboard is injection-molded from eco-friendly rubber modified styrene which provides for a very durable and rigid, yet lightweight platform for guitarist's effect pedals. 

The 1SKB-PS-8 features eight (8) built-in 9VDC output jacks and an external transformer rated at 500mA of total current. The large 19" x 12" hook and loop surface allows for secure pedal positioning for up to eight (8) standard size pedals. All cables are included for powering the most popular pedals. An upgraded, Soft case is included for added protection for your pedals. The Soft case features a lined EPS interior with a ballistic nylon outer cover.

Injection molded from eco-friendly rubber modified styrene in the United States for strength and durability

Heavy-duty 19" x 12" hook and loop mounting surface

36" x 2" hook side for your pedals for secure, repositionable mounting to the Pedalboard surface

Fully integrated nine volt DC 500mA power source for up to eight pedals

8- 3.5mm miniplug to 2.1mm x 5mm DC connector (for center negative pedals)

1- 3.5mm miniplug to 3.5mm miniplug (for center positive pedals)

1- 3.5mm miniplug to 9 volt battery clip (for vintage pedals without an external power connector

Soft Case with adjustable shoulder strap and exterior pocket for cables and accessories

The 1SKB-SC2316 combines the protective qualities of rigid foam with the style and portability of a canvas bag. A padded interior, padded carrying handle, and shoulder strap provide lightweight portability. The 1SKB-SC2316 Pedalboard Soft Case is designed to fit our PS-8 and PS-15 Pedalboards, but can also be used for any item with these dimensions (the case is not limited to pedalboards).

A rigid EPS foam interior is surrounded by a heavy-duty canvas exterior with an exterior zippered pocket.  A removable one inch (1") pad of convoluted foam in the lid is provided to allow for various product heights. A shoulder strap is also included to make transport simple. Backed by SKB's one year Soft Product Warranty.

Interior height is measured with max foam compression.

Durable 600 Denier exterior layered with rigid foam

Carrying handle and convenient shoulder strap

Backed by SKB's one year Soft Product Warranty

The SKB-SC2111 Controller Soft Case is designed to fit all-in-one effects floor boards (BOSS GT-10, Digitech RP1000, Line6 X3 Live, Vox Tonelab LE and many more) as well as MIDI foot controllers (Roland FC300, etc.)  It also fits popular dj products such as the Pioneer DDJ-FLX4 controller.

A rigid EPS foam interior is surrounded by a heavy-duty canvas exterior with an exterior zippered pocket.  A removable one inch (1") pad of convoluted foam in the lid is provided to allow for various product heights. A shoulder strap and padded carrying handle is also included to make transport simple. Backed by SKB's 1 year Soft Product Warranty.

Backed by SKB's 2 year Soft Product Warranty

The 1SKB-PS-8 Powered Pedalboard is injection-molded from eco-friendly rubber modified styrene which provides for a very durable and rigid, yet lightweight platform for guitarist's effect pedals. The 1SKB-PS-8 features eight (8) built-in 9VDC output jacks and an external transformer rated at 1.0A of total current. The large 19" x 12" hook and loop surface allows for secure pedal positioning for up to eight (8) standard size pedals. All cables are included for powering the most popular pedals.  A heavy-duty ballistic nylon carry bag with exterior zipper pocket and adjustable shoulder strap are also included with the 1SKB-PS-8 Powered Pedalboard

The 1SKB-SC2709 combines the protective qualities of rigid foam with the style and portability of a canvas bag. A padded interior, padded carrying handle and shoulder strap provide lightweight portability. 

The 1SKB-SC2709 MIDI Foot Controller Soft Case will accommodate the FCB1010, FC200, MFC10, Fender Cyber Foot, the Line 6 Longboard and more. Backed by SKB's one year Soft Product Warranty.

The 3i-231714GFX 4U Guitar FX Fly Rack allows for transport of both guitar processor rack equipment and a foot controller all in the same case. 

This case was designed specifically for the Kemper Profiler and Line 6 Helix rackmount processors and foot controllers. The top tray features robust ABS plastic and high density foam, with precut holes to perfectly match the foot controller feet and prevent movement or shifting within the case. Below the top tray is a 4U injection molded rack frame that can hold the guitar processor with one additional space for a power supply, recording interface, or other equipment. 

Rear rack rails also provide options to mount other equipment or pass through connections. This case also comes standard with a pull out handle and wheels for convenient transport.

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit 

4U removable injection molded shock rack cage

Custom-cut top tray to accommodate Line Six Helix Control or Kemper Profiler Remote

Under 62 linear inches (non-oversized luggage)

Ultra high-strength polypropylene copolymer resin case construction

Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)

Automatic ambient pressure equalization value (MIL-STD-648C)

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.

Locking loops to accommodate a customer supplied lock