Pro Audio Config

Pro Audio Cases -> Subcategories

Rack Cases -> Subcategories

Soft Racks

Roto Racks

Fly Racks

Shock Racks

MIL-STD Shock Racks

Specialty Racks

Accessories (for Rack Cases)

The iSeries 3i3026-15LV1 Case is the perfect case to provide the ultimate protection for the Waves LV1 Classic mixing console. Below the mixer is open space to store cables and other accessories. The main accessory space below measures 30” x 12.625” x 1” high at the lowest and 10” at the tallest point, perfect for storing gooseneck mics and additional cables.

Fits the Waves LV1 Classic mixing console

Open space below mixer for accessories measuring 30" x 12.625" x 1"/10"

Oversized tow handle and built-in quiet glide wheels

The 3i2828-12AS features a high quality foam interior that has been form cut to fit the Allen & Heath Avantis Solo. Below the mixer is open space to store cables and other accessories. The space measures 26” long by 13.25” wide and is 1” tall towards the back of the case and 5.5”tall towards the front.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).

Fits the Allen & Heath Avantis Solo and accessories

Accessory space measures 26” long by 13.25” wide and is 1” tall towards the back of the case and 5.5”tall towards the front

Ultra high-strength polypropylene copolymer resin

UV, solvent, corrosion and fungus resistant (MIL-STD 810H)

Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H)

Automatic ambient pressure equalization value (MIL-STD 810H)

The iSeries 3i1813-7-CQ2 features a high quality foam interior that has been form-cut to fit the Allen & Heath CQ-20B. A large accessory pocket measuring 17.25" x 4.6" x 5" can house the power supply, cables, adapters, microphones, or other accessories.

Custom foam fits the Allen & Heath CQ-20B

Waterproof and dust tight design (MIL-STD 810H)

Snap-down rubber over-molded cushion grip handle

Ambient pressure equalization valve (MIL-STD 810H)

Resistant to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H)

The iSeries 3i1813-7-CQ1 Case provides superior protection for Allen & Heath’s CQ-12T or CQ-18T mixer. This case has a unique custom foam insert that will accommodate either model by removing a perforated foam insert section. There are two accessory pockets included inside the case.One below the mixer that measures 10.7” x 6.5” x 2.375” deep and one to the right of the mixer that measures 12” x 2.6” x 5” deep. These are perfect for the power supply, extra cables, adapters, or a microphone.

Custom cut foam interior for Allen & Heath CQ-12T or CQ-18T

10.7" x 6.5" x 2.375" space below mixer for accessories

12" x 2.6" x 5" side pocket for accessories

Reinforced locking loops for customer supplied locks

Resistant to UV, solvents, corrosion, fungus (MIL-STD 810H)

Resistant to impact damage (MIL-STD 810H)

Featuring high quality form-cut PE foam designed specifically to house the RODECaster Pro II Production Console, the 3i1813-7-RP2 case interior also includes a main removable pocket for two Rode PodMics as well as two additional accessory pockets. If the PodMic cutout is not needed, the custom foam can be removed to provide an open cavity for additional storage. The main compartment measures 16.25" x 5" x 4" without the custom foam PodMic insert. The smaller compartments measure 9.25" x 2" x 4.25" and 9.125" x 2" x 2.75".

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).

Accommodates the RODECaster Pro II Production Console

Removable foam insert below mixer holds two Rode PodMics

Waterproof dust-tight design (MIL-STD 810H)

Ambient pressure equalization valve(MIL-STD 810H)

Resistant to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810H)

Made In USA

The 3i0705-3-P4 iSeries Zoom PodTrak P4 Case features a high quality foam interior that has been form-cut to fit the Zoom PodTrak P4 with a pocket below to store the usb charging cable and other small accessories. The accessory pocket measures 3.625" x 3" x 1".

Accessory pocket for charging cable and other small accessories

Complete gasket seal makes these cases absolutely watertight

Rubber over-molded cushion grip handle custom cut foam interior

The 3i1711-6-P8 iSeries Zoom PodTrak P8 Case features a high quality foam interior that has been form-cut to fit the PodTrak P8 with a large accessory pocket below to house the power supply, mic cables, adapters, and other accessories. The accessory pocket measures 9.125" x 7.25" x 1.75".

Space for power supply, mic cables, adapters, and other accessories

Automatic ambient pressure equalization valve

Locking loops accept a customer supplied lock

Featuring high quality form-cut PE foam designed specifically to house the Allen & Heath SQ5 Digital mixer, the 3i2222-12SQ5 iSeries Allen & Heath SQ5 Mixer Case interior also includes open space below the mixer to store cables and other accessories.

Custom cut foam interior for Allen & Heath SQ5

Featuring high quality form-cut PE foam designed specifically to house the QSC TouchMix-30 Pro Digital mixer, the 3i2222-12QSC iSeries QSC Mixer Case interior also includes a pocket for a standard iPad with cover and a large 10.5" x 9.25" recessed compartment below the mixer for cables and other accessories. The case does accommodate if the QSC TS-1 Tablet Support Stand is installed. An oversized carry handle, user-friendly one-finger push button release tow handle, and convenient in-line wheels all help to ensure that transporting your gear is as easy and secure as possible.

The case has space for the QSC TS-1 Tablet Support Stand to be installed on the mixer.

Custom cut interior for TouchMix-30 Mixer

These Rack Ears are specially designed steel rack ears to fit the Yamaha TF1 mixer into the 1SKB19-R1406 Mighty GigRig or the 1SKB19-R1400 GigSafe.

The rack ears will allow the mixer to sit lower into the case allowing the user to mount an optional 1SKB-AV14 AV Shelf and still be able to fit the lid on without bumping the top of the mixer.  The Rack Ears come with screws and washers for easy mounting.

This rSeries Mixer Case features a custom foam interior for the Midas M32 32-Channel mixing console, with a double-walled, roto-molded LMDP exterior for maximum strength and rigidity with (4) casters (two of which are locking casters), (6) Spring loaded handles, (8) Steel heavy-duty latches, and a hinged doghouse for management of all of the back connectors.

The overall weight is lighter than equivalent road cases while providing maximum security in transport.

Roto-molded of Linear Medium Density Polyethylene (LMDP)

Large rubber gasket in the lid for moisture control

Four casters (two of which are locking casters)

Hinged doghouse design for cable and connector management

This rSeries Mixer Case features a custom foam interior for a X32 Behringer 32 Channel mixing console, with a double-walled, roto-molded LMDP exterior for maximum strength and rigidity with (4) casters (two of which are locking casters), (6) Spring loaded handles, (8) Steel heavy-duty latches, and a hinged doghouse for management of all of the back connectors.

The 1SKB-R100 is a 10U slanted top rack mixer case that features steel threaded rails, a hard lid and a removable rear door for maximum access to the rack gear, side access ports (for cable routing) on each side with a comfortable rubber over-molded handle on each side for easy carrying. 

The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard cover and rear door are Injection molded of Rubber Modified Styrene (RMS). Two TSA locking SKB patented Trigger Latch® System secure the lid while the flat hard top allows for stacking with the revised roto racks to create a modular solution for easy set-up.

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit 

The height at the front of the rack is 5.25".  The height in the rear of the rack is 7.75".  Fits the Allen & Heath SQ5 only with the 1SKB-RE-SQ5 rack ears.

Roto-molded of LMDP Linear Medium Density Polyethylene

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.

The iSeries 3i1813-7-TMIX Case is the ideal case to provide superior protection to for QSC's popular TouchMix-8 or the TouchMix-16 mixers. This case has a unique custom foam insert that will accommodate either model by removing a perforated foam insert section. A custom cutout also provides space for the power supply while the lower part of the case accommodates a standard or mini iPad. 

Custom cut PE foam to fit the QSC TouchMix-8

Removable foam section to fit the TouchMix-16

Room for an iPad (standard or Mini size) and power supply

Locking loops for a customer supplied lock

The 1SKB-SC2714 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards. 

A padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC2714 Controller Soft Case will accommodate products such as the Pioneer DDJ-SX3 and the DDJ-FLX6. It also fits popular guitar pedal products like the Headrush Prime.  Backed by SKB's one year Soft Product Warranty.

Durable 600 Denier exterior layered with rigid foam

Carrying handle and convenient shoulder strap

Backed by SKB's one year Soft Product Warranty

The 1SKB-SC2414 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards.

A padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC2414 Controller Soft Case will accommodate products such as the Numark NS6 and more. Backed by SKB's one year Soft Product Warranty.

The 1R2723-8BW features a custom foam interior to accommodate the Allen & Heath ZED24 and other similar sized mixers.

The 1R2723-8BW is rotationally molded of linear low density polyethylene plastic for strength and durability and includes three oversized carrying handles, convenient in-line skate wheels and an expandable pull handle for easy transport. SKB's patented trigger release TSA latches and stainless steel hinges provide ultimate protection on the road. The custom interior foam provides additional space under the mixer for cables and other accessories and includes four adhesive backed foam inserts for a custom fit to your mixer.

The 1R2723-8BW Mixer case is complete with SKB's Unlimited Lifetime Warranty to the original purchaser.

Interior space is 25.25” x 22.25” x 8"

Built-in extendable pull handle and wheels

Superior roto molded strength and ergonomic design

Lightweight LLDPE shell for maximum impact resistance

UV, solvent, corrosion and fungus resistant (MIL-STD-810F)

Complete gasket seal makes these case watertight (MIL-STD-C-4150J)

SKB's Universal Mixer/Equipment Bags are the perfect solution for protecting and transporting your gear from one gig to another with sizes to accommodate the most popular mixers, drum machines, recording interfaces, midi controllers, light panels and other equipment. 

The 1SKB-UB1818 Universal Bag has an interior dimension of 18" x 18" x 5.5" to accommodate products such as the PreSonus Studiolive 16.0.2, Behringer Xenyx X2222USB, Mackie 1604-VLZ3 and more with the iPad in the padded pocket.

 The Universal Mixer/Equipment Bag is constructed of a durable 600 Denier padded exterior with heavy-duty dual zippers, an adjustable, padded shoulder strap and double stitched carrying handle for added convenience. The bag includes a convenient, double zippered padded exterior accessory compartment that is large enough to keep your iPad protected while stowing cables or additional gear.

Convenient padded exterior accessory compartment for iPad or cables

The 1SKB-UB2020 Universal Bag measures 20" x 20" x 5.5" to house some of the larger gear such as, Allen & Heath Zed-14, Mackie Onyx 1620i and Yamaha EMX5014C 

The 1SKB-UB1515 Universal Bag measures 15" x 15" x 5" inside and will accommodate mixers like the Peavey PV10, Allen & Heath Xone DB4, and Mackie DL 1608 with the iPad in the padded pocket.

The 1SKB-UB0909 Mixer Bag interior measures 9" x 9" x 2.75" and will accommodate smaller equipment like the, Behringer Xenyx 802, Mackie 402-VLZ3, Boss DR-3, Focusrite Scarlett 8i6, Roland R-44, TASCAM DR-680, and Avid Mbox Mini Ultra Compact to name a few.

The Universal Mixer/Equipment Bag is constructed of a durable 600 Denier padded exterior with heavy-duty dual zippers, an adjustable, padded shoulder strap and double stitched carrying handle for added convenience. The bag includes a convenient, double zippered padded exterior accessory compartment that is large enough to keep your iPad protected while stowing cables or additional gear.

Convenient padded exterior accessory compartment

The 1SKB-UB1212 Universal Bag interior measures 12" x 12" x 4" and will accommodate various gear such as the Behringer Xenyx 1002B, Mackie 1202VLZ, Akai MPD26, and YamahaMG822CX.

The 3i2217-81602 case features high quality custom foam for the PreSonus 16.0.2 digital performance/recording mixer. The foam is designed to provide protection to the faders and back panel inputs, and there is ample storage below the mixer for the power cable or other accessories.

Utra high-strength polypropylene copolymer resin

Locking loops to accept a customer supplied lock

The Gig Safe takes the top 14U+ rack spaces of the Mighty GigRig and puts it in an easier to handle case. 

The Gig Safe includes two large side mounted handles that allow the load to be balanced when carrying. The lid is extended so XLR cables can remain plugged into the mixer. The Gig Safe also includes four recessed latches that can be used to secure to the top of the 1SKB-REX6 Expander Rack to provide the same amount of mounting rack units as the Mighty GigRig. With the addition of the 1SKB-R3224 wheel dolly, the Gig Safe and Expander can be maneuvered with ease.

Top rail is at 7 degrees angle and is 5 1/4" deep in the front and 9 3/8" from the top of the rail to the bottom of the case. From the end of the rail to the back of the case is approximately 3 1/8"

Oversized side handles for easier handling