Parts Config

These steel rack ears are designed specially to fit the Allen & Heath mixer into the 1SKB-R100, 1SKB-R102W, 1SKB-R104W, 1SKB-R106W, or the 1SKB19-R1208 GigRig.

The rack ears will allow the mixer to sit lower into the case, which enables the user to mount an optional 1SKB-AV8 for the 1SKB-R100 or 1SKB19-R1208 and still fit the lid on without bumping the top of the mixer. The rack ears come with screws and washers for easy mounting.

This will not work with the 1SKB-AV14 or 1SKB19-R1406 Mighty Gig Rig.

This comprehensive kit includes load spreaders for stability and extra shock absorbers for shock and vibration when additional weight is required.

Load capacity is 150 lbs to 300 lbs, and fits only on the 3SKB 24 inch, 28 inch and 30 inch shock racks.

Downloads

3SKB-HPK Installation Video

SKB Rack Screws and Washers (25/pk). Perfect for attaching various electronic gear to your SKB Cases with Rack Rails.

These Rack Ears are specially designed steel rack ears to fit the Yamaha TF1 mixer into the 1SKB19-R1406 Mighty GigRig or the 1SKB19-R1400 GigSafe.

The rack ears will allow the mixer to sit lower into the case allowing the user to mount an optional 1SKB-AV14 AV Shelf and still be able to fit the lid on without bumping the top of the mixer.  The Rack Ears come with screws and washers for easy mounting.

Support Rails that are made of zinc plated steel to support additional weight for 28" Shock Racks only."

Roto molded caster board with 4\ locking wheels for stacking and moving SKB's Roto Molded

The 1SKB-VS-2 is an 8U shelf designed to be used with any of our top slant rack mixer cases such as the 1SKB-R102, 1SKB-R104, 1SKB-R106 or Gig Rig products such as the 1SKB19-R1208. The VS-2 shelf has a hook and loop covering to secure any products that can't be rack mounted. The covering is on both sides so the shelf which provides two different mounting options. The shelf can be recessed below the rack rails for small mixers or DJ equipment or above the rack rails for the perfect solution for a laptop or video projector.

The AV-8 is an 8U retractable shelf designed to be used with our 1SKB-R100, 1SKB-R102, 1SKB-R102W, 1SKB-R104, 1SKB-R104W, 1SKB-R106, 1SKB-R106W, and 1SKB19-R1208 products. The AV-8 is the perfect solution for a laptop or projector.

The mounting surface is 17" x 11". The 1SKB-AV8 was designed to work with any slant rack that is 8U or longer and has a slant in the 6-8 degree range, however, there is no guarantee that the lid for your case will fit over the 1SKB-AV8 (except when used with the 1SKB-R102/4/6). When mounting to a slant rack other than the 1SKB-R102/4/6, the 1SKB-AV8 is ~3.375" high when folded down (when measured from the top of the rail to the retaining lip on the front of the 1SKB-AV8's mounting surface). WHen folded down, the AV8 requires 13 3/4" clearance from back to front.

The 1SKB-AV14 is a uniquely designed scissor hinged shelf that puts a shelf just where it is needed. The hook and loop surface of the A/V shelf is ideal for laptop computers, projectors, or monitors. The scissor design allows the shelf to remain connected to the Mighty GigRig (1SKB19-R1406) or Gig Safe (1SKB19-R1400) while the lid is closed. The steel arms only require 2U of rack space for secure mounting.

The 1SKB-AV14 has a maximum load capacity of 30 pounds. When the shelf is folded down for storage, it requres 23 3/4" clearance from back to front. (It requires 14U of space for storage). Shelf dimensions are 16" wide x 16.5" deep.

Rotomolded caster board with 5 inch locking caster wheels that will mount to the SKB19-REX6 Expander for easy transport.

Set of eight extra shock absorbing kit can be added by the 

 on the 3RS/3RR series to increase shock attenuation from 150-300 lbs. The 3SKB-SA fits all of the 3SKB 20” with wheels and on the 1SKB 20” standard shock racks, they can be added by the factory or customer only on the 1SKB-R910U20 and larger sizes.

Accessory pocket that measures 20" x 10" x 2" with hardware to attach to the inside of SKB Shockrack lids. 

See the Downloads tab for the installation instruction PDF.

Installation Instructions

Set of four load spreaders with instructions for installation on SKB 24\ and 30\" shockrack cases. Each part mounts to the caster track and the side wall of the case thus dispersing weight and stabilizing transport of unusually heavy loads."

Support Rails that are made of zinc plated steel to support additional weight for 20" Shock Racks only."

Support Rails that are made of zinc plated steel to support additional weight for 30" Shock Racks only."

Accessory pocket that measures 20" x 15.5" x 2" with hardware to attach to the inside of SKB Shockrack lids. 

See the Downloads tab for an installation instructions PDF.

Accessory bag with compartments that measures 12" x 9.5" x 3.5" with mounting hardware for storing casters for SKB Shockracks.

Support Rails that are made of zinc plated steel to support additional weight for 24" Shock Racks only."

Rear Rack Rail Kit for Roto-racks,SKB19-R1406 Might Gig Rig, and SKB19-REX6 Gig Rig Expander case.

Nuts and bolts kit. Mounting hardware in the racks is easy with the SKB rack rail and provided hardware.

Be creative with this rackmount pull-out shelf. Cushioned heavy-duty Hook and Loop Fastener surface will hold hundreds of different gizmos and gadgets.