Musical Instruments Config

Guitar Cases -> Subcategories

Keyboard Cases -> Subcategories

Percussion Cases -> Subcategories

B and O Cases -> Subcategories

This case was specifically designed to protect the Zoom H6essential portable recorder, with closed cell foam in the base to hold the H6essential recorder, a XYH-6e Stereo Mic Capsule, and accessories. The accessory compartment measures 4” x 3.5” x 2.625” and is perfect for an additional capsule, small cable, or adapter.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).

Fits the Zoom H6essential portable recorder, Mic Capsule, and accessories

Ultra high-strength polypropylene copolymer resin

UV, solvent, corrosion and fungus resistant (MIL-STD 810H)

Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H)

Automatic ambient pressure equalization value (MIL-STD 810H)

This case was specifically designed to protect the Zoom H4essential portable recorder, with closed cell foam in the base to hold the recorder and space for a memory card and accessories. The accessory compartment measures 7.5” x 1.375” x 3” and is perfect for smaller cables and adapters.

Fits the Zoom H4essential portable recorder and accessories

The 3i2828-12AS features a high quality foam interior that has been form cut to fit the Allen & Heath Avantis Solo. Below the mixer is open space to store cables and other accessories. The space measures 26” long by 13.25” wide and is 1” tall towards the back of the case and 5.5”tall towards the front.

Fits the Allen & Heath Avantis Solo and accessories

Accessory space measures 26” long by 13.25” wide and is 1” tall towards the back of the case and 5.5”tall towards the front

The iSeries 3i-2015-7TMP features a custom, high quality foam interior that’s been form cut to accommodate the Fender Tone Master Pro Guitar Workstation. There are accessory compartments below the workstation and behind it providing space for all the gig necessities. The accessory pocket behind the workstation measures 11” x 3.45” x 5.5” and is large enough to hold the Mission Engineering Fender SP1-TMP Expression Pedal, but can also be used for other accessories such as a microphone, wah pedal, volume pedal, or other equipment. The space below the workstation measures 10.5” x 10.5” x 1.5” towards the back and 10.5” x 10.5” x 3.25” towards the front of the case and is perfect to hold the power supply, extra cables and other small accessories.

Custom foam fits the Fender Tone Master Pro Guitar Workstation

Accessory pocket behind Workstation measures 11" x 3.45" x 5.5" is large enough to hold the Mission Engineering Fender SP1-TMP Expression Pedal, or other accessories

Accessory pocket below Workstation measure 10.5" x 10.5" with a 1.5" depth at the back and a 3.25" depth at the front.

Ultra high-strength polypropylene copolymer resin case construction

Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)

Automatic ambient pressure equalization value (MIL-STD-648C)

Locking loops to accommodate a customer supplied lock

For years SKB has worked hard to be the industry leaders of percussion and drum cases. The 1SKB-UDP1 combines some of the most popular sizes all in one kit. It includes the 8 x 10 Tom, 9 x 12 Tom, 6.5 x 14 Snare, 14 x 16 Floor Tom, and 18 x 22 Bass cases creating the Ultimate Drum Package of cases.

Design features include a traditional D shape, with molded in feet for protection and upright positioning, deep Roto-X rib pattern offering durability and reliable stacking, fabric covered foam inserts on the lid and base with carpet lined sides that resist damage by drum hardware and securely cradle drums with maximum protection and sure grip handles with a 90 degree stop.

Molded feet for protection and upright positioning

Deep Roto-X rib pattern for durability and reliable stacking

Fabric covered foam inserts in lid and base, with carpet-lined sides

The 1SKB-1712TPB includes a 1SKB-PB1712 Injection Molded Non-powered Pedalboard bundled with a Think Tank-designed soft bag. The pedalboard measures 17.67" x 12.37" and features a unique under-mounting surface that allows for convenient storage and transport of a variety of power supplies. 

Others standard features include molded-in hand grips for easy lifting, six zip ties for cable management, and 96" of 3M brand low profile Dual-Lock for secure positioning of pedals. The soft bag features a padded carry handle, rigid exterior, YKK zippers, and a thick, padded shoulder strap. It also has a large front pocket that's perfect for cables, sheet music, guitar strings, and other accessories.

Think Tank soft bag and 1SKB-PB1712 pedalboard bundle

Under-mounted tray accommodates a variety of power supplies

Includes 96" of 3M brand low profile Dual-Lock