Musical Instruments Config

Guitar Cases -> Subcategories

Keyboard Cases -> Subcategories

Percussion Cases -> Subcategories

B and O Cases -> Subcategories

Made In USA

The iSeries 3i-5014-EDGE is designed to accommodate the Roland AX Edge Keytar, and features high quality foam to secure the keytar as well a large accessory pocket for a strap, pedals, and other equipment. The accessory compartment measures 10.75" x 8.5" x 4".

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit 

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).

Accommodates a Roland AX Edge Keytar and accessories

Accessory compartment measuring 10.75" x 8.5" x 4"

Waterproof and dust tight design (MIL-STD 810H)

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.

Snap-down rubber over-molded cushion grip handle

Ambient pressure equalization valve (MIL-STD 810H)

Resistant to UV, solvents, corrosion, fungus (MIL-STD 810H)

Resistant to impact damage (MIL-STD 810H)

The new 3i-3614-TKBD iSeries 49-note Keyboard Case features an all-new Think Tank-designed interior that's fully customizable with repositionable Velex-covered foam pads to ensure a perfect fit - even if your gear changes. The 3i-3614-TKBD can accommodate such models as the Nord A1, Dave Smith Pro 2, Yamaha MX49, and Waldorf Blofeld 49-key. 

14 total hook-and-loop pads in 4 different sizes

steel reinforced padlock loops for customer-supplied padlocks

The new 3i-5616-TKBD iSeries 88-note Keyboard Case is waterproof, military grade, and features an all-new Think Tank-designed interior that's fully customizable with repositionable Velex-covered foam pads to ensure a perfect fit, even if your gear changes. 

The 3i-5616-TKBD can accommodate such models as the Korg Grandstage 88, Nord Piano 3 and Stage 3 88, and Yamaha CP4. Interior dimensions: 52.5" x 15" x 6.25"

18 total hook-and-loop pads in 3 different sizes

Interior measurement of 52.5" x 15" x 6.25"

The new 3i-4214-TKBD iSeries 61-note Narrow Keyboard Case is waterproof, military grade, and features an all-new Think Tank-designed interior that's fully customizable with repositionable Velex-covered foam pads to ensure a perfect fit, even if your gear changes. 

The 3i-4214-TKBD can accommodate such models as the Dave Smith Prophet REV2, Electro 5D 61, Korg Kross 2-61, and Hammond SK1. Interior dimensions: 39.5" x 13.5" x 3.75"

Interior measurement of 39.5" x 13.5" x 3.75"

The new 3i-4217-TKBD iSeries 61-note Keyboard Case is waterproof, military grade, and features an all-new Think Tank-designed interior that's fully customizable with repositionable Velex-covered foam pads to ensure a perfect fit, even if your gear changes. 

The 3i-4217-TKBD can accommodate such models as the Crumar Mojo 61, Access Virus T12, Korg PA4X-61, and Kurzweil PC3K6. Interior dimensions: 39.5 x 16" x 5.625"

16 total hook-and-loop pads in 4 different sizes

Interior measurement of 39.5 x 16" x 5.625"

The new 3i-4719-TKBD iSeries 61-note Keyboard Case is waterproof, military grade, and features an all-new Think Tank-designed interior that's fully customizable with repositionable Velex-covered foam pads to ensure a perfect fit, even if your gear changes. 

The 3i-4719-TKBD can accommodate such models as the Yamaha Montage 6 and PSR-S970, Korg PA 1000 and Kronos 61, and Kurzweil Forte 7. Interior dimensions: 44" x 18" x 5.875"

18 total hook-and-loop pads in 4 different sizes

Interior measurement of 44" x 18" x 5.875"

The new 3i-6018-TKBD iSeries 88-note Keyboard Case is waterproof, military grade, and features an all-new Think Tank-designed interior that's fully customizable with repositionable Velex-covered foam pads to ensure a perfect fit, even if your gear changes. 

The 3i-6018-TKBD is now the largest injection molded keyboard case we make, and can accommodate such models as the Korg Kronos and Krome 88, Kurzweil PC3K8 and Forte 88, and Roland RD-2000. Interior dimensions: 57" x 17" x 6"

The new 3i-5014-TKBD iSeries 76-note Narrow Keyboard Case is waterproof, military grade, and features an all-new Think Tank-designed interior that's fully customizable with repositionable Velex-covered foam pads to ensure a perfect fit even if your gear changes. 

The 3i-5014-TKBD can accommodate such models as the Korg Krome 73, Hammond SK1-73, Nord Stage 3 Compact, and Electro 5D 73. Interior dimensions: 47.5" x 13.5" x 4.25"

Interior measurement of 47.5" x 13.5" x 4.25"

The 1SKB-SC76KW soft case is constructed of wood framed walls and an outer 600 Denier nylon covering with a completely padded interior. Two large padded straps provide protection and security with in-line skate wheels and legs with an expanding stabilizer for standing the case on its end. The back and side of the case features rails to protect the case when loading and unloading. Two large pouches on the lid for storage of cables, pedals and other accessories.

Expanding stabilizer legs for standing the case up

Protective stair and trunk rails for loading

The 1SKB-SC88KW soft case is constructed of wood framed walls and an outer 600 Denier nylon covering with a completely padded interior. Two large padded straps provide protection and security with in-line skate wheels and legs with an expanding stabilizer for standing the case on its end. The back and side of the case features rails to protect the case when loading and unloading. Two large pouches on the lid for storage of cables, pedals and other accessories.

The 1SKB-SC88NKW soft case is constructed of wood framed walls and an outer 600 Denier nylon covering with a completely padded interior. Two large padded straps provide protection and security with in-line skate wheels and legs with an expanding stabilizer for standing the case on its end. The back and side of the case features rails to protect the case when loading and unloading. Two large pouches on the lid for storage of cables, pedals and other accessories.

Small exterior pocket is 12" x 8.25" x 1.75". Large exterior pocket is 23.5" x 12" x 1.75"

The 1SKB-SC3212 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or MIDI controller keyboards.

A padded interior, padded carrying handle and shoulder strap provides lightweight portability. The SKB-SC3212 Controller Soft Case will accommodate the M-Audio Axiom 49 MIDI Keyboard Controllers and more. Backed by SKB's one year Soft Product Warranty.

Exterior pocket dimension is 15" x 10" x 1.5"

Durable 600 Denier exterior layered with rigid foam.

Carrying handle and convenient shoulder strap.

Backed by SKB's one year Soft Product Warranty.

The 1SKB-SC61KW soft case is constructed of wood framed walls and an outer 600 Denier nylon covering with a completely padded interior. 

Two large padded straps provide protection and security with in-line skate wheels and legs with an expanding stabilizer for standing the case on its end. The back and side of the case features rails to protect the case when loading and unloading. Two large pouches on the lid for storage of cables, pedals and other accessories.

Rigid side wood frame with a 600 Denier exterior

Expanding Stabilizer for balancing the case while standing

Protective rails for loading and unloading

The 1SKB-SC1913 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards.

A padded interior, padded carrying handle, and shoulder strap provide lightweight portability. The 1SKB-SC1913 Controller Soft Case will accommodate products such as the American Audio VMS4 MIDI Station controller, Axiom 25 Midi Keyboard and more.  Backed by SKB's 1 year Soft Product Warranty.

Exterior pocket dimensions are 15" x 11" x 1.5"

Durable 600 Denier exterior layered with rigid foam

Carrying handle and convenient shoulder strap

Backed by SKB's 1 year Soft Product Warranty

The 1SKB-SC2311 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards.

A padded interior, padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC2311 Controller Soft Case will accommodate products such as the Akai MINIAK Analog Synthesizer or the microKORG Synthesizer Vocoder and more. Backed by SKB's one year Soft Product Warranty.

Exterior pocket dimensions are 16" x 8.25" x 1.50"

Backed by SKB's one year Soft Product Warranty

The 1SKB-5820W 88-note keyboard case has been designed to accommodate most 88-note keyboards with repositionable corner cleats for a custom fit and lid foam for additional support. Exterior bumpers protect the valance and hardware from impact damage.

Interior dimensions are measured with all 4 cleats installed.

Meets ATA Cat 1 specs as airline shipping container

Exterior bumpers protect valance and hardware

The 1SKB-4214W 61-note keyboard case has been designed to accommodate TSA accepted and recognized locking latches. 

The patented corner cleat design holds the keyboard in place on an indestructible hook and loop fastener surface. The foam in the top of the lid adds additional support to the keyboard while in transit. Exterior bumpers protect the valance and hardware from impact damage.