Model: 3i-0907-MC3
$89.99
The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3I-0907-MC3 case measures 9" x 7" x 4" deep and is the most compact 3-mic case on the market. The case has convoluted foam in the lid for a compression fit and is covered by SKB's Unconditional Lifetime Warranty.
Read More
The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3I-0907-MC3 case measures 9" x 7" x 4" deep and is the most compact 3-mic case on the market. The case has convoluted foam in the lid for a compression fit and is covered by SKB's Unconditional Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
Prop65 Information
This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
- Resistant to corrosion and impact damage
- Continuous molded-in hinge
- Trigger Latch® System
- Rubber over-molded cushion grip handle
- Custom cut foam to hold six microphones
Exterior
Hard
Product Weight
2.73 lb
1.24 kg
Exterior Length
10.5 in
26.67 cm
Exterior Width
9.5 in
24.13 cm
Exterior Height
4.75 in
12.06 cm
Carton Length
11.5 in
29.21 cm
Carton Width
10 in
25.40 cm
Carton Height
5.5 in
13.97 cm
Shipping Weight
3.2 lb
1.45 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Chart of all SKB iSeries products and their dimensions.
You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.
For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.
SKB has been making cases since 1977. We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us at caprop65@skbcases.com
Model: 3i-0907-MC3
$89.99
The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3I-0907-MC3 case measures 9" x 7" x 4" deep and is the most compact 3-mic case on the market. The case has convoluted foam in the lid for a compression fit and is covered by SKB's Unconditional Lifetime Warranty.
Read More
The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3I-0907-MC3 case measures 9" x 7" x 4" deep and is the most compact 3-mic case on the market. The case has convoluted foam in the lid for a compression fit and is covered by SKB's Unconditional Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
Prop65 Information
This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
- Resistant to corrosion and impact damage
- Continuous molded-in hinge
- Trigger Latch® System
- Rubber over-molded cushion grip handle
- Custom cut foam to hold six microphones
Exterior
Hard
Product Weight
2.73 lb
1.24 kg
Exterior Length
10.5 in
26.67 cm
Exterior Width
9.5 in
24.13 cm
Exterior Height
4.75 in
12.06 cm
Carton Length
11.5 in
29.21 cm
Carton Width
10 in
25.40 cm
Carton Height
5.5 in
13.97 cm
Shipping Weight
3.2 lb
1.45 kg
SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB-branded hardshell cases are warranted for life to the original owner only. Cases that have been modified, previously owned, or used for rental purposes by institutions or schools are not covered by this warranty.
Chart of all SKB iSeries products and their dimensions.
You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.
For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.
SKB has been making cases since 1977. We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us at caprop65@skbcases.com
Proudly Made in the USA
SKB iSeries Cases are molded from a proprietary blend of ultra high-strength polypropylene copolymer resin that makes them both lighter and 2.8x stronger than the competition. Every iSeries case is designed, manufactured, assembled, and finished at our factory in Orange, California—and has been since the beginning. It's this unsurpassed commitment to quality and innovation that makes SKB Cases the gold industry standard for military-grade protective cases.