Model: 3i-M3U13-FRM
$169.99
SKB’s injection molded Fly Rack internal frames are available to order separately in a variety of rack unit sizes and depths. These are perfect for users that already own the Fly Rack system, but would like to have additional rack frames mounted full of equipment ready to be swapped and quickly deployed. These could also be used in a studio setup where the equipment is not meant to be transported. The tops and bottoms of the frames are injection molded to stay lightweight and feature rubber feet that enable stacking to help create a modular setup. The frame has threaded steel front and rear rack rails and comes with rack screws (10-32 thread). Please see the list below to verify which additional rack frame will work with each type of Fly Rack.
Read More
SKB’s injection molded Fly Rack internal frames are available to order separately in a variety of rack unit sizes and depths. These are perfect for users that already own the Fly Rack system, but would like to have additional rack frames mounted full of equipment ready to be swapped and quickly deployed. These could also be used in a studio setup where the equipment is not meant to be transported. The tops and bottoms of the frames are injection molded to stay lightweight and feature rubber feet that enable stacking to help create a modular setup. The frame has threaded steel front and rear rack rails and comes with rack screws (10-32 thread). Please see the list below to verify which additional rack frame will work with each type of Fly Rack.
Frame dimension: 19.625" x 13.25" x 7.62"
- 3i-M2U13-FRM can be used with 3i-2215M82U or 3i-2217M82U
- 3i-M3U13-FRM can be used with 3i-2217M103U
- 3i-M4U13-FRM can be used with 3i-2217M124U
- 3i-M6U13-FRM can be used with 3i-2317M146U
- 3i-M3U20-FRM can be used with 3i-2424M103U
- 3i-M6U20-FRM can be used with 3i-2424M146U
PLEASE NOTE: Individual Rack Frames are not intended to be transported without the appropriate iSeries case and do not carry a warranty. Please contact SKB with any questions at (800) 410-2024.
Prop65 Information
This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.
- Injection molded top and bottom frames
- Threaded steel front and rear rails
- Fits in corresponding Fly Rack case
- Stackable with other Fly Rack frames for modular setup
Exterior
Hard
Rack Units
3
Rail To Rail
13 in
33.02 cm
Product Weight
7.09 lb
3.22 kg
Exterior Length
19.625 in
49.85 cm
Exterior Width
13.25 in
33.66 cm
Exterior Height
7.625 in
19.37 cm
Carton Length
24.5 in
62.23 cm
Carton Width
18.25 in
46.36 cm
Carton Height
9.75 in
24.77 cm
Shipping Weight
8.77 lb
3.98 kg
Chart of all SKB iSeries products and their dimensions.
You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.
For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.
SKB has been making cases since 1977. We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us at caprop65@skbcases.com
Model: 3i-M3U13-FRM
$169.99
SKB’s injection molded Fly Rack internal frames are available to order separately in a variety of rack unit sizes and depths. These are perfect for users that already own the Fly Rack system, but would like to have additional rack frames mounted full of equipment ready to be swapped and quickly deployed. These could also be used in a studio setup where the equipment is not meant to be transported. The tops and bottoms of the frames are injection molded to stay lightweight and feature rubber feet that enable stacking to help create a modular setup. The frame has threaded steel front and rear rack rails and comes with rack screws (10-32 thread). Please see the list below to verify which additional rack frame will work with each type of Fly Rack.
Read More
SKB’s injection molded Fly Rack internal frames are available to order separately in a variety of rack unit sizes and depths. These are perfect for users that already own the Fly Rack system, but would like to have additional rack frames mounted full of equipment ready to be swapped and quickly deployed. These could also be used in a studio setup where the equipment is not meant to be transported. The tops and bottoms of the frames are injection molded to stay lightweight and feature rubber feet that enable stacking to help create a modular setup. The frame has threaded steel front and rear rack rails and comes with rack screws (10-32 thread). Please see the list below to verify which additional rack frame will work with each type of Fly Rack.
Frame dimension: 19.625" x 13.25" x 7.62"
- 3i-M2U13-FRM can be used with 3i-2215M82U or 3i-2217M82U
- 3i-M3U13-FRM can be used with 3i-2217M103U
- 3i-M4U13-FRM can be used with 3i-2217M124U
- 3i-M6U13-FRM can be used with 3i-2317M146U
- 3i-M3U20-FRM can be used with 3i-2424M103U
- 3i-M6U20-FRM can be used with 3i-2424M146U
PLEASE NOTE: Individual Rack Frames are not intended to be transported without the appropriate iSeries case and do not carry a warranty. Please contact SKB with any questions at (800) 410-2024.
Prop65 Information
This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.
- Injection molded top and bottom frames
- Threaded steel front and rear rails
- Fits in corresponding Fly Rack case
- Stackable with other Fly Rack frames for modular setup
Exterior
Hard
Rack Units
3
Rail To Rail
13 in
33.02 cm
Product Weight
7.09 lb
3.22 kg
Exterior Length
19.625 in
49.85 cm
Exterior Width
13.25 in
33.66 cm
Exterior Height
7.625 in
19.37 cm
Carton Length
24.5 in
62.23 cm
Carton Width
18.25 in
46.36 cm
Carton Height
9.75 in
24.77 cm
Shipping Weight
8.77 lb
3.98 kg
Chart of all SKB iSeries products and their dimensions.
You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.
For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.
SKB has been making cases since 1977. We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us at caprop65@skbcases.com