[+] expand

iSeries 1914 Pro DSLR Case

Model: 3i-19148DSLR

The iSeries 1914 Pro DSLR Case (3i-19148DSLR) is the ideal case to protect DSLR Cameras and their popular accessories. The interior of this case is made of high quality PE foam and can fit up to two camera bodies. The main ...

Exterior Length: 21.26 in (54.00 cm)
Exterior Width: 16.75 in (42.55 cm)
Exterior Depth: 9.83 in (24.97 cm)
The iSeries 1914 Pro DSLR Case (3i-19148DSLR) is the ideal case to protect DSLR Cameras and their popular accessories. The interior of this case is made of high quality PE foam and can fit up to two camera bodies. The main camera compartment can be adjusted to fit a variety of DSLR body sizes. This section also has a perforated piece of foam that can be removed to accommodate cameras with battery grips. The orientation of the DSLR fit allows access to the memory card without removing the camera. It also allows for quick and easy access to the camera by leaving the grip exposed to grab.


This case features four lens slots. Three of the slots are adjustable to fit a variety of lenses. Each one of the three adjustable slots contains three half inch foam rings that can be removed to fit different sized lenses. There is a section for lens hoods which can also be adjusted by three half inch foam rings. This case has additional compartments to fit a flash, memory cards, batteries, and other additional accessories.
This case has wheels and a pull out handle for easy transportation.


The iSeries 1914 Pro DSLR Case, (3i-19148DSLR) has TSA lockable trigger release latches for quick but secure access. This custom waterproof case is made in the USA and is backed by SKBís Unconditional Lifetime Warranty.

About our iSeries
SKB's iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.



WATCH THE VIDEO!

Features
  • Custom cut PE foam to fit up to two DSLR bodies, lenses, lens hoods, flash, batteries, memory cards and additional accessories
  • Removable foam sections to fit a variety of camera bodies (e.g. cameras with battery grips) and lenses
  • Patented TSA Trigger Release Latches
  • Pull out handle and wheels
  • Unconditional Lifetime Warranty
  • Ultra high-strength polypropylene copolymer resin
  • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
  • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
  • Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
  • Resistant to corrosion and impact damage
  • Molded-in hinge
  • Rubber over-molded cushion grip handle
  • Locking loops for a customer supplied lock
  • Patented "trigger release" latch system
  • Rubber over-molded cushion grip handle
Specifications
Exterior Length
21.26 in
54.00 cm
Exterior Width
16.75 in
42.55 cm
Exterior Depth
9.83 in
24.97 cm
Lid Depth
2.00 in
5.08 cm
Base Depth
6.00 in
15.24 cm
Shipping Weight
16.20 lb
7.35 kg
Product Weight
14.80 lb
6.71 kg

The long lens cutout is 8.8" long by 3.5" wide by 4.25" deep. It can fit a 70-200mm lens or a 100-400mm lens. Each of the three lens slots measure 3.5" in diameter with a maximum depth of 5.5". The lens hood slot which could also be used for a lens measures 4.5" in diameter with a maximum depth of 5.5".
Lifetime Warranty

SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. Foam is not covered by SKBís warranty. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB hardshell cases are warranted for life to the original owner only. Cases used for rental purposes, used by institutions or schools, modified or used cases are not covered by this warranty.

Do you make custom cases?
Yes. Minimum quantities are required. Contact our Music Division at 800-410-2024

How do I register my case or rack for the lifetime warranty?
You may register yourself as the original owner of the case or rack at SKB Music Division Product Registration.

How do I request replacement parts?
Original owners of SKB brand hardshell cases may order replacement parts online at no cost and with free shipping. To request field replaceable parts please visit the SKB Store for instructions. You will receive a discount code for use at the SKB Store equal to the online price of the replacement parts you need.

How long will a repair take?
A repair usually takes about two weeks from the time we receive your case.

Is it possible to update my older case with the new TSA latches?
No. Only newer SKB products are designed to accommodate this new latch. Older model cases can not be retrofitted.

What do I have to do before I return my case for repair?
Contact our Customer Service Department at customerservice@skbcases.com or 800-410-2024 for a Return Authorization Number. Please have the model number of the case on hand.

Where will I find my model number on my case?
It is not on your case. You will find the number on your original proof of purchase receipt.

No accessories or related products available.